|
SDI TRAIT CROP AND
GRAIN TESTING
•
Custom assays for detecting Genetically Modified Traits in plant
tissues, seeds and grain
• Speed the development of
crops containing hard-to-monitor traits
• Reduce time and cost for
the quality assurance of transgenic seed purity
• Monitor for integrated pest
management
• Certify the chain of
custody from growers to consumers
• Limit liability with crop
identification prior to spraying or handling.
Now you can perform tests in
the field with plant material, on trucks, at the elevator and on
barges all within 3-5 minutes. These simple
proven test strips can help mange risk and certify purity from
the breeder, grower or shipper and prevent contamination from
bin to bin. These tests give a simple pass/fail result with an
accuracy of 0.1% with 96% confidence, 0.2% with 99% confidence
on Roundup Ready ®
crops. The test works by detecting the CP4
EPSPS protein produced by a gene, which has been incorporated
into Roundup Ready ® soybeans.
Simply place leaf tissue or cracked seed in to the tube, add the
buffer solution, dip the
test strip and within minutes get yes or no result. A single
reddish line on the test strip indicates a negative result and
two reddish lines indicate
a positive result.
Tests performed on grain are
completed using representative samples of the whole lot. As with
all good sampling procedures, the
user must take representative samples and divide down to a
workable sample size. The sample is put through a blender, sold
below. The test is then completed
on the homogenized sample. Minimum sample is 100 grams.
Test kits include Trait
GR test strips, sample buffer, sample tubes (1.5 ml), transfer
pipettes and User’s Guide.
Trait Test Kit, 100 Tests for
Roundup Ready ® leaf and single soybean seed...... No.
TRAIT-1S
Trait Test Kit, 10
Tests for Roundup Ready ® leaf and single soybean seed........ No.
TRAIT-S
Trait Test Kit, 100
Tests for Roundup Ready ® soybean, grain
test.................... No.
TRAIT-1SB
Trait Test Kit, 10
Tests for Roundup Ready ® soybean, grain
test...................... No.
TRAIT-SB
TRAIT FOR Bt CORN
Trait detects Bt, a
protein expressed by the Cry1Ab gene, in Novartis YieldGard ®
(Bt11 Event), Monsanto YieldGard ®
(MON810 Event), and Novartis
Knockout ® (Event
176). The test results are obtained in 5-8 minutes.
Samples used for the Bt1 Corn
Grain Test Kit can be sub-samples of representative samples
collected from trucks, railcars, barges
etc. for moisture, test weight, or dockage tests. The size of
the sub-samples to be used will depend on the percent Bt screening
level and an acceptable level of risk that the Bt level is close
to the screening level. Sample size is dependent upon kernel
weight and kernel count as described in the instructions
included with the kit.
The sample is processed in a
blender using a small Mason type jar with a grinding time of
10-15 seconds on high speed. The sample
is then mixed with tap water and a concentrated buffer solution
(included) until the entire sample is well wetted. With a
wooden spatula, a sample cup is
filled and leveled off. The Trait Test Strip is pushed down into
the cup and sits for between 5-8 minutes,
until the control (top line) is clearly visible. If the sample
is Bt positive, two red lines will appear on the test strip. It
is suggested that a 20%
dilution of household bleach be used to clean jars and blender
blades between tests (not included.) Enough
supplies for 100 tests are included; buffer solution, wooden
spatulas, sample cups, and test strips. Blender and jars are
sold separately.
Trait Test Kit, 100 tests for
Bt Corn, grain samples....................................... No.
TRAIT-1C
Blender for grinding
representative grain samples 110V, 60Hz ONLY.............. No.
BLEND/B
Small blender jars
....................................................................................
No. BLEND-J
Tube Rack
...............................................................................................
No. 8003
Graduated Cylinder for
buffer solution measurement.................................... No.
8004
Paddle for 60 count
soybean
.....................................................................
No. SP60
(Check with us for future SDI
Trait test kits on additional products and events.)
For more information on this
product, please see page 20 of Seedburo's Current Print Catalog.
More
Literature Here
Product
Code |
Product
Description |
Catalog
Page |
Special
Code |
Product
Price |
| 7903505
|
EXTRACTION BUFFER
|
20
|
|
130.00
|
| 8003
|
TUBE RACK HOLDS 20 TUBES
|
20
|
|
15.50
|
| 8004
|
50 ML PLASTIC GRADUATED
|
20
|
|
24.00
|
| BLEND/B
|
BLENDER, 110 VOLT, 60 HZ LESS
|
20
|
|
45.00
|
| BLEND-J16
|
16 OZ JAR FOR USE WITH TRAIT
|
20
|
|
15.00
|
| BLEND-J4
|
4 OZ JARS FOR TRAIT CHECK
|
20
|
|
10.50
|
| BLEND-J8
|
8 OZ JARS FOR TRAIT CHECK
|
20
|
|
11.50
|
| BLEND-PC
|
PROTECTIVE COVER FOR BLENDER
|
20
|
|
10.00
|
| SP60
|
60 COUNT SOYBEAN PADDLE
|
20
|
|
15.00
|
| TR-BT15
|
BT1 5-MINUTE CORN TEST, 100
|
20
|
|
320.00
|
| TR-BT1F
|
BT1F HERCULUX CORN, FOR GRAIN,
|
20
|
|
320.00
|
| TR-BT1G1
|
BT1 CORN, FOR GRAIN, 100 TEST
|
20
|
|
290.00
|
| TR-BT1L1
|
BT1 CORN, FOR LEAF & SEED,
|
20
|
|
290.00
|
| TR-BTLL
|
BT1 & LIBERTY LINK COMBO KIT,
|
20
|
|
700.00
|
| TR-CRY3YG
|
CRY3Bb, DETECTS YIELDGARD
|
20
|
|
320.00
|
| TR-LLG1
|
LIBERTY LINK CORN, FOR GRAIN
|
20
|
|
320.00
|
| TR-LLL
|
DISCONTINUED
|
20
|
#
|
0.00
|
| TR-LLL1
|
LIBERTY LINK CORN, FOR LEAF &
|
20
|
|
320.00
|
| TR-RRC1
|
ROUNDUP FOR CORN, NK603,
|
20
|
|
320.00
|
| TR-RRSG
|
ROUNDUP FOR SOYBEAN, 10 TEST
|
20
|
|
105.00
|
| TR-RRSG1
|
ROUNDUP FOR SOYBEAN, 100 TEST
|
20
|
|
320.00
|
| TR-RRSL
|
ROUNDUP FOR SOYBEAN, LEAF &
|
20
|
#
|
0.00
|
| TR-RRSL1
|
ROUNDUP FOR SOYBEAN, LEAF &
|
20
|
|
320.00
|
| TR-RRSM1
|
ROUNDUP FOR TOASTED SOYBEAN
|
20
|
|
290.00
|
|